Table of Contents
Advertisement
4. Installation
Your Fisher & Paykel refrigerator is fitted with
front and rear rollers, designed for moving
the product in the forwards and backwards
direction.
Avoid moving the product in a sideways
direction as this may damage the rollers or the
floor covering/surface.
Your refrigerator will arrive with the front feet
A
wound up making moving the product into its
final location a simple task.
Roll the refrigerator into its final position making sure there is the correct air gap
B
between the product and surrounding cabinetry. See minimum clearance in cabinetry
dimensions table.
Adjust the front feet down until the refrigerator is leaning backward with the front
C
approximately 10mm higher than the back. This will ensure a good door closing action.
Aligning your refrigerator with cabinetry.
D
Align the sides of the refrigerator with the cabinetry by adjusting the hinge side
●
●
front foot.
Adjust the handle side foot until it touches the floor and takes a small amount
●
●
of weight.
Once the refrigerator is in place and aligned with cupboards/alcove gently push on
●
●
the front top and check if the product is rocking or stable.
12
INSTALLATION INSTRUCTIONS
Lower the front
of the refrigerator
Refrigerator feet
Raise the front of
the refrigerator
Hide quick links:
Advertisement
Table of Contents
