Endress+Hauser Proline Promass 84 Operating Instructions Manual page 39

Proline Promass 84
!
Endress+Hauser
5.4.2 Current device description files
The following table illustrates the suitable device description file for the operating tool in question
and then indicates where these can be obtained.
HART protocol:
Valid for software:
Device data HART
Manufacturer ID:
Device ID:
HART version data:
Software release:
Operating program:
Field Xpert handheld terminal
FieldCare / DTM
AMS
SIMATIC PDM
Tester/simulator:
Fieldcheck
5.4.3 Device and process variables
Device variables:
The following device variables are available using the HART protocol:
Code (decimal)
0
2
5
6
7
Process variables:
At the factory, the process variables are assigned to the following device variables:
• Primary process variable (PV)  Mass flow
• Secondary process variable (SV)  Totalizer 1
• Third process variable (TV)  Density
• Fourth process variable (FV)  Temperature
Note!
You can set or change the assignment of device variables to process variables using Command 51
ä 44.
3.01.00
11 (ENDRESS+HAUSER)
hex
52
hex
Device Revision 9 / DD Revision 1
01.2010
Sources for obtaining device descriptions:
• Use update function of handheld terminal
• www.endress.com  Download-Area
• CD-ROM (Endress+Hauser order number 56004088)
• DVD (Endress+Hauser order number 70100690)
• www.endress.com  Download-Area
• www.endress.com  Download-Area
Sources for obtaining device descriptions:
• Update by means of FieldCare via flow device FXA 193/291 DTM in Fieldflash
Module
Device variable
OFF (unassigned)
Mass flow
Volume flow
Corrected volume flow
Density
Function DEVICE SOFTWARE
 Function MANUFACTURER ID
 Function DEVICE ID
Code (decimal) Device variable
8 Reference density
9 Temperature
250
251
252
Operation
Totalizer 1
Totalizer 2
Totalizer 3
39