Basic Functions; Switching The System On; Power-Saving Automatic Standby; Adjusting Volume And Sound - Philips MC-122 Manual

STANDBY-ON PROGRAM TIMER
ON
OFF
PROGRAM
SOURCE
SELECT
PLAY•PAUSE STOP
iR
PREV NEXT
IMPORTANT:
Before you operate the system, complete
the preparation procedures.

Switching the system on

G Press 2 STANDBY ON or SELECT
SOURCE.
➜ The system will switch to the last selected
source.
G Press CD, TUNER, TAPE or AUX on the
remote control.
➜ The system will switch to the selected source.
To switch the system to standby mode
G Press 2 STANDBY ON on the system or
remote control.
G If in tape mode or recording mode, press
STOP•OPEN first.
➜ The volume level, interactive sound settings,
last selected source and tuner presets will be
retained in the player's memory.

Power-saving automatic standby

As a power-saving feature, the system
automatically switches to standby 15 minutes
after a tape or CD has reached the end and no
control is operated.
RDS REPEAT SHUFFLE
CLOCK BAND

Basic Functions

Adjusting volume and sound

1
Turn the VOLUME control anti-clockwise to
decrease or clockwise to increase volume on the
system (or press VOL -/+ on the remote
control).
➜ Display shows the volume level VOL and a
number from 0-32.
2
Press DSC repeatedly to select the desired
sound effect: CLASSIC (no indication)/
ROCK ( ) / JAZZ (
3
Press DBB to switch bass enhancement on or
off.
➜ Display shows:
DBB
4
Press INCREDIBLE SURR. (IS on the
remote control) to switch the surround sound
effect on or off.
➜ Display shows:
Note:
– The effect of INCREDIBLE SURROUND may
vary with different types of music.
5
Press MUTE on the remote
control to interrupt sound
reproduction instantly.
➜ Playback will continue
without sound and the display
shows MUTE.
G To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
) / POP ( ).
if the DBB is activated.
if activated.
DSC DBB
MUTE
11