Brake Disc; Rear Axle - Suzuki GSX-R1000 Service Manual

Hide thumbs Also See for GSX-R1000:

Table of Contents

• Tighten the sprocket mounting nuts to the specified torque.

 Rear sprocket nut: 60 N·m (6.0 kgf-m, 43.5 lb-ft)

Stamped mark A on the sprocket should face outside.

• Install the collar 2.

BRAKE DISC

• Apply THREAD LOCK to the disc bolts and tighten them to

the specified torque.

Make sure that the brake disc is clean and free of any greasy

 99000-32130: THREAD LOCK SUPER "1360"

 Brake disc bolt: 35 N·m (3.5 kgf-m, 25.5 lb-ft)

• Install the collar 1.

• Remount the rear wheel and rear axle shaft, and install the

washer 1 (Except for E-03, 28, 33) and rear axle nut 2.

• Adjust the chain slack after rear wheel installation. (2-21)

CHASSIS 8-47