Installation - Sony MEX-N5200BT Operating Instructions Manual

Installation

Removing the protection collar
and the bracket
Before installing the unit, remove the
protection collar  and the bracket  from
the unit.
1
Pinch both edges of the protection
collar , then pull it out.

2
Insert both release keys  until they
click, and pull down the bracket ,
then pull up the unit to separate.


Face the hook inwards.
38
GB
Mounting the unit in the
dashboard
Before installing, make sure the catches on
both sides of the bracket  are bent
inwards 2 mm ( 3 /
32
1 Position the bracket  inside the
dashboard, then bend the claws
outward for a tight fit.
53 mm (2

2 Mount the unit onto the bracket ,
then attach the protection collar .

Notes
• If the catches are straight or bent outwards, the
unit will not be installed securely and may spring
out.
• Make sure the 4 catches on the protection collar
 are properly engaged in the slots of the unit.
Detaching and attaching the front
panel
For details, see "Detaching the Front Panel"
(page 6).
Resetting the unit
For details, see "Resetting the Unit" (page 6).
in).
1
182 mm (7 /
1
/ in)
8
Catch



in)
4