Page 1
To switch the FM/AM tuning step, see page 7. To cancel the demonstration (DEMO) display, see page 17. Para cambiar el paso de sintonización de FM/AM, consulte la página 7. Para cancelar la pantalla de demostración (DEMO), consulte la página 18. MEX-N5150BT/MEX-N4150BT...
Page 2
OFF until the display disappears each time you turn the ignition off. Disclaimer regarding services offered by third parties Services offered by third parties may be changed, suspended, or terminated without prior notice. Sony does not bear any responsibility in these sorts of situations.
Important notice Caution IN NO EVENT SHALL SONY BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWNTIME, AND PURCHASER’S TIME RELATED TO...
Guide to Parts and Controls Main unit Front panel removed (inner panel) N-Mark Touch the control dial with Android phone to make BLUETOOTH connection. Disc slot Display window SEEK +/– Tune in radio stations automatically. Press and hold to tune manually.
Page 6
ALBUM / RM-X231 Remote commander Skip an album for audio device. Press and hold to skip albums continuously. (repeat) (shuffle) MIC (page 14) PAUSE MEGA BASS Press to turn on/off the MEGA BASS function. PTY (program type) Select PTY in RDS. ...
Resetting the unit Getting Started Before operating the unit for the first time, after replacing the car battery, or changing the Detaching the Front Panel connections, you must reset the unit. Press RESET on the inner panel with a ball-point pen, etc., after You can detach the front panel of this unit to detaching the front panel.
Pairing and connecting with a Preparing a BLUETOOTH Device BLUETOOTH device You can enjoy music, or perform handsfree calling depending on the BLUETOOTH compatible device When connecting a BLUETOOTH device for the first such as a smartphone, cellular phone and audio time, mutual registration (called “pairing”) is device (hereafter “BLUETOOTH device”...
Page 9
To start playback To install the microphone For details, see “Playing a BLUETOOTH Device” For details, see “Installing the microphone (MEX- (page 12). N5150BT only)” (page 33). To cancel pairing Connecting with an iPhone/iPod Perform step 2 to cancel the pairing mode after this unit and the BLUETOOTH device are paired.
Connecting an iPod/USB Device Listening to the Radio Turn down the volume on the unit. Listening to the Radio Connect the iPod/USB device to the unit. To connect an iPod/iPhone, use the USB Tuning step setting is required (except for Argentine connection cable for iPod (not supplied).
Using Radio Data System (RDS) Playback Selecting program types (PTY) Playing a Disc Press PTY during FM reception. Insert the disc (label side up). Rotate the control dial until the desired program type appears, then press it. The unit starts to search for a station broadcasting the selected program type.
To stop playback To match the volume level of the BLUETOOTH Press and hold OFF for 1 second. device to other sources Start playback of the BLUETOOTH audio device at a To remove the device moderate volume, and set your usual listening Stop playback, then remove the device.
Searching by skipping items (Jump mode) Handsfree Calling (via BLUETOOTH only) Press (browse). Press SEEK +. To use a cellular phone, connect it with this unit. For details, see “Preparing a BLUETOOTH Device” Rotate the control dial to select the item. (page 8).
From the call history By voice tags Press CALL, rotate the control dial to You can make a call by saying the voice tag stored in a connected cellular phone that has a voice select [RECENT CALL], then press it. dialing function.
“SongPal” is an app for controlling Sony audio devices which are compatible with “SongPal”, by your iPhone/ Android phone. What you can control with “SongPal” varies depending on the connected device.
Activating voice recognition (Android Using Siri Eyes Free phone only) Siri Eyes Free allows you to use an iPhone By registering applications, you can control an handsfree by simply speaking into the microphone. application by voice command. For details, refer to This function requires you to connect an iPhone to the help of the application.
BEEP Activates the beep sound: [ON], [OFF]. Settings AUTO OFF Shuts off automatically after a desired time Canceling the DEMO Mode when the unit is turned off: [NO], [30S] (30 seconds), [30M] (30 minutes), [60M] (60 You can cancel the demonstration display which minutes).
[CENTER] – [LEFT-15]. C.AUDIO+ (ClearAudio+) Reproduces sound by optimizing the digital FADER signal with the Sony recommended sound Adjusts the relative level: [FRONT-15] – [CENTER] settings: [ON], [OFF]. (Automatically sets to [OFF] – [REAR-15]. when [EQ10 PRESET] is changed and/or [MEGABASS] is set to [ON].)
Selects the subwoofer phase: [NORM], [REV]. Changes the illumination color: [1], [2]. SW POS* (subwoofer position) Selects the subwoofer position: [NEAR], BUTTON-C (button color) (MEX-N5150BT only) [NORMAL], [FAR]. Sets a preset color or customized color for the LPF FREQ (low pass filter frequency) buttons.
Establish and terminate “SongPal” function Selects the color with sound synchronization: (connection). [ON], [OFF]. WHT MENU (white menu) (MEX-N5150BT only) You can display the menu more clearly (white) without concern for color setting: [ON], [OFF]. START-WHT (start white) (MEX-N5150BT only)
CD-DA disc, and following support site: other sessions are not played. Customers in Latin America: Discs that this unit CANNOT play http://esupport.sony.com/ES/LA/ CD-R/CD-RW of poor recording quality. Customers in Asia Pacific: CD-R/CD-RW recorded with an incompatible http://www.sony-asia.com/section/support recording device.
Never touch the connectors directly with your fingers or with any metal device. If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Sony dealer. Specifications Maintenance Tuner section...
Page 23
External antenna (aerial) connector Outputs: Sensitivity: 26 μV Audio outputs terminal: CD Player section MEX-N5150BT: front, rear, sub MEX-N4150BT: front, rear/sub switchable Signal-to-noise ratio: 120 dB Power antenna (aerial)/Power amplifier control Frequency response: 10 – 20,000 Hz terminal (REM OUT)
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR trademarks owned by Bluetooth SIG, Inc. and any BUSINESS INTERRUPTION) HOWEVER CAUSED AND use of such marks by Sony Corporation is under ON ANY THEORY OF LIABILITY, WHETHER IN license. Other trademarks and trade names are CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING those of their respective owners.
CD playback During playback or reception, the demonstration mode starts. The disc does not play. If no operation is performed for 5 minutes with Defective or dirty disc. [DEMO-ON] set, the demonstration mode starts. The CD-R/CD-RW is not for audio use (page 21). ...
Page 26
BLUETOOTH function The phone sound quality is poor. Phone sound quality depends on reception The connecting device cannot detect this unit. conditions of cellular phone. Before the pairing is made, set this unit to pairing Move your car to a place where you can standby mode.
Page 27
Siri Eyes Free is not activated. USB ERROR: The USB device cannot be played. Perform the handsfree registration for an iPhone Connect the USB device again. that supports Siri Eyes Free. Set the Siri function on the iPhone to on. USB NO DEV: A USB device is not connected or ...
Page 28
(about 6 seconds) (page 17). If these solutions do not help improve the situation, consult your nearest Sony dealer. If you take the unit to be repaired because of CD playback trouble, bring the disc that was used at...
*3 RCA pin cord (not supplied) installed around your feet. *4 Depending on the type of car, use an adaptor for a *6 For details on installing the microphone, see wired remote control (not supplied). “Installing the microphone (MEX-N5150BT only)” (page 33).
Connection (For MEX-N4150BT) Subwoofer* Power amplifier* from a wired remote control (not supplied)* White White/black striped Front speaker* Gray Gray/black striped Green Green/black striped Rear speaker* Purple Purple/black striped Black Yellow Blue/white striped (MAX 0.4A) For details, see “Making For Argentine models ...
This connection is only for amplifiers and a power antenna (aerial). Connecting any other Subwoofer system may damage the unit. For MEX-N5150BT: Notes Preparation of the rear speaker cords is required To a car’s illumination signal (Argentine models only).
Page 33
Power connection diagram (Argentine Installing the microphone (MEX- models only) N5150BT only) Make sure your car’s auxiliary power connector, and To capture your voice during handsfree calling, you need to install the microphone . match the connections of cords correctly depending on the car.
, then You may not be able to install this unit in some makes of Japanese cars. In such a case, consult your pull up the unit to separate. Sony dealer. TOYOTA ...
If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer.
Page 36
Exención de responsabilidad sobre los servicios prestados por otros proveedores Los servicios prestados por otros proveedores están sujetos a cambios, anulaciones o interrupciones sin previo aviso. Sony no asume responsabilidad alguna en estas situaciones.
Page 37
Aviso importante Precaución SONY NO SERÁ RESPONSABLE DE NINGÚN DAÑO INCIDENTAL, INDIRECTO O DERIVADO NI DE OTROS DAÑOS QUE INCLUYEN, ENTRE OTROS, PÉRDIDA DE GANANCIAS, PÉRDIDA DE INGRESOS, PÉRDIDA DE DATOS, PÉRDIDA DE LA UTILIDAD DEL PRODUCTO O DE CUALQUIER EQUIPO RELACIONADO, TIEMPO DE INACTIVIDAD Y TIEMPO DEL COMPRADOR RELACIONADO CON LA UTILIZACIÓN DE ESTE...
Guía para las partes y los controles Unidad principal Retiro del panel frontal (panel interno) Marca N Toque el selector del control con un teléfono Android para establecer conexión BLUETOOTH. Ranura del disco Ventana de visualización SEEK +/– Para sintonizar emisoras de radio en forma automática.
Page 40
Botones numéricos (1 al 6) Control remoto RM-X231 Para recibir las emisoras almacenadas. Manténgalo presionado para almacenarlas en forma manual. Llame a un número almacenado. Manténgalo apretado para guardar un número telefónico. ALBUM / Para saltearse un álbum en el dispositivo de audio.
Reinicio de la unidad Procedimientos iniciales Antes de operar la unidad por primera vez, luego de remplazar la batería del automóvil o cambiar las Extracción del panel frontal conexiones, debe reiniciar la unidad. Presione RESET en el panel interno con un bolígrafo de punta Es posible extraer el panel frontal de la unidad para redonda, etc., luego de haber extraído el panel evitar que la roben.
Para un smartphone con Android OS 4,0 o inferior Ajuste del reloj instalado, se requiere descargar la aplicación “NFC Easy Connect” disponibles en Google Play™. Es posible que la aplicación no esté disponible para su Presione MENU, gire el selector de descarga en algunos países/regiones.
Page 43
Con la señal BLUETOOTH activada: si el encendido se ajusta en la posición ON, la unidad vuelve a conectarse automáticamente al último teléfono celular conectado. Para instalar el micrófono Para obtener más información, consulte “Instalar el micrófono (sólo para MEX-N5150BT)” (página 35).
Conectar con un iPhone/iPod Conexión de un dispositivo (Autoemparejamiento con BLUETOOTH) iPod/USB Cuando un iPhone/iPod con iOS5 o superior instalado se conecta al puerto USB, la unidad se Baje el volumen de la unidad. empareja y conecta con el iPhone/iPod Conecte el dispositivo iPod/USB a la automáticamente.
Usar el RDS (Sistema de datos Escuchar la radio de radio) Escuchar la radio Selección de tipos de programa (PTY) Se necesita el ajuste del paso de sintonización (excepto para modelos argentinos) (página 7). Presione PTY durante la recepción FM. Para escuchar una estación de radio, presione SRC para seleccionar [TUNER].
Conecte el dispositivo iPod/USB al puerto USB (página 10). Reproducción Se inicia la reproducción. Si ya está conectado un dispositivo, para iniciar la reproducción pulse SRC para seleccionar Reproducción de un disco [USB] ([IPD] aparece en la pantalla cuando se reconoce el iPod).
Búsqueda de una pista por nombre Reproducción de un dispositivo (Quick-BrowZer™) BLUETOOTH Durante la reproducción de los Puede reproducir contenido en un dispositivo dispositivos de audio CD, USB o BT conectado que sea compatible con BLUETOOTH AUDIO* , presione (navegar)* para A2DP (Perfil de distribución de audio avanzado).
Desde el historial de llamadas Llamada con manos libres (sólo a Presione CALL, gire el selector de control través de BLUETOOTH) para seleccionar [RECENT CALL] y, a continuación, presiónelo. Aparece una lista del historial de llamadas. Para usar un teléfono celular, conéctelo a esta unidad.
Marcación predefinida de números Para cambiar entre el modo manos libres y el modo manual telefónicos Durante una llamada, presione MODE para cambiar Es posible almacenar hasta 6 contactos en la el audio de la llamada telefónica entre la unidad y marcación preajustada.
Facebook/Calendar, etc., ésta es automáticamente controlar dispositivos de audio anunciada a través de los parlantes de la unidad. Sony que son compatibles con “SongPal”, por su teléfono iPhone/Android. Lo que pueda controlar con “SongPal” varía de acuerdo al dispositivo conectado.
Notas El reconocimiento por voz puede no estar disponible Utilizar Siri Eyes Free en ciertos casos. El reconocimiento por voz puede no funcionar Siri Eyes Free le permite utilizar el manos libres de correctamente dependiendo del rendimiento del iPhone al simplemente hablar al micrófono.
Configuración General Ajustes (GENERAL) Cancelación del modo DEMO CLOCK-ADJ (ajuste del reloj) (página 8) Puede cancelar la pantalla de muestra que aparece TUNER-STP (paso de sintonización) (página 7) cuando la fuente está apagada y se muestra el (excepto para modelos argentinos) reloj.
Para detalles acerca de la con los ajustes de sonido recomendados por compatibilidad de su automóvil, visite el sitio web Sony: [ON], [OFF]. (Automáticamente se de soporte técnico que figura en la cubierta posterior. configura en [OFF] cuando [EQ10 PRESET] se cambia o [MEGABASS] está...
Page 54
LPF FREQ (frecuencia de filtro de paso bajo) POSITION (posición de escucha) Selecciona la frecuencia de corte del altavoz potenciador de graves: [50Hz], [60Hz], [80Hz], [100Hz], [120Hz]. LPF SLOP (pendiente de filtro de paso bajo) Selecciona la pendiente LPF: [1], [2], [3]. SW DIREC (conexión directa al altavoz potenciador de graves) Puede utilizar el altavoz potenciador de graves...
* No aparece cuando [F/R POS] se ajusta en [OFF]. ALL-C (todo color) (sólo para MEX-N5150BT) Configura un color preseleccionado o personaliza un color para la pantalla y los Configuración de Pantalla botones.
PHONE BOOK (página 14) Puede actualizar el firmware de esta unidad desde REDIAL (página 14) el siguiente sitio web de soporte técnico: Clientes de Latinoamérica: RECENT CALL (página 14) http://esupport.sony.com/ES/LA/ Clientes en Asia-Pacífico: VOICE DIAL (página 15) http://www.sony-asia.com/section/support DIAL NUMBER (página 14) http://www.sony-asia.com/caraudio/...
Page 57
Esta unidad se diseñó para reproducir discos que Acerca de iPod cumplen con el estándar Compact disc (CD). Los DualDisc y otros discos de música codificados con Puede conectarse a los siguientes modelos de tecnologías de protección de derechos de autor iPod.
Sony más cercano. No toque nunca los conectores directamente con los dedos ni con ningún dispositivo metálico.
Page 59
SPP (Perfil de puerto serie) marcas comerciales registradas y son propiedad de MAP (Perfil de acceso a mensajes) Bluetooth SIG, Inc., y Sony Corporation posee HID (Perfil de dispositivo de interfaz humana) licencia para utilizar cualquiera de dichas marcas. Códec correspondiente: Otras marcas registradas y nombres comerciales SBC (.sbc) y AAC (.m4a)
libFLAC Generales Copyright (C) 2000-2009 Josh Coalson La unidad no recibe alimentación. Copyright (C) 2011-2013 Xiph.Org Foundation Si la unidad está apagada y la pantalla La redistribución y el uso en formas binarias y de desaparece, no se puede operar con el control fuente, con o sin modificación, están permitidos remoto.
Page 61
Los botones de operación no funcionan. Los archivos MP3/WMA/AAC tardan más tiempo El disco no sale expulsado. en reproducirse que los otros. La conexión no es correcta. El inicio de la reproducción de los siguientes Revise la conexión de la unidad. discos tarda algo más de tiempo.
Page 62
Función BLUETOOTH Se producen ecos o ruidos durante las conversaciones telefónicas. El dispositivo de conexión no puede detectar Baje el volumen. esta unidad. Ajuste el modo EC/NC en [EC/NC-1] o [EC/NC-2] Antes de realizar el emparejamiento, configure (página 15).
Page 63
Mensajes/indicaciones de error Se contesta una llamada accidentalmente. El teléfono conectado está configurado para CD ERROR: No puede reproducirse el disco. El disco responder una llamada automáticamente. será expulsado automáticamente. Limpie o inserte el disco correctamente, o El emparejamiento ha fallado porque se ha asegúrese de que el disco no esté...
Page 64
Si estas soluciones no ayudan a solucionar el problema, póngase en contacto con el distribuidor Para la operación SongPal: Sony más cercano. Si entrega la unidad para su reparación a causa de problemas en la reproducción de CD, lleve el disco APP --------: No se estableció...
Utilice solamente el hardware de montaje suministrado para obtener una instalación segura. Observe el cable del sistema de alimentación (amarillo) Para MEX-N5150BT Cuando conecte esta unidad junto con otros componentes estéreo, la capacidad nominal de la corriente del circuito del auto al cual la unidad se encuentra conectada debe ser mayor que la suma de la capacidad nominal del fusible de cada componente.
*4 Dependiendo del tipo de automóvil, utilice un pies. adaptador para un control remoto conectado (no *6 Para obtener más detalles sobre la instalación del suministrado). micrófono, consulte “Instalar el micrófono (sólo para MEX-N5150BT)” (página 35).
Conexión (Para MEX-N4150BT) Subwoofer* Amplificador de potencia* desde un control remoto conectado (no suministrado)* Blanco Blanco/negro a rayas Altavoz delantero* Gris Gris/negro a rayas Verde Verde/negro a rayas Altavoz trasero* Púrpura Púrpura/negro a rayas Negro Amarillo Rojo Azul/blanco a rayas (MÁX. 0,4 A) Para obtener más Para modelos argentinos ...
Page 68
Conectar cualquier otro sistema puede dañar la rayas de potencia (REM OUT) unidad. Fuente de alimentación Rojo Para MEX-N5150BT: conmutada Masa Negro Para la señal de iluminación de un automóvil Asegúrese de conectar primero el cable a tierra Conexión fácil de subwoofer negro a un punto de puesta a tierra.
Page 69
Conexión para sostener la memoria Cuando el auto no tiene posición ACC Rojo Rojo Cuando el cable de la fuente de alimentación amarillo está conectado, la alimentación siempre abastecerá al circuito de la memoria incluso cuando el interruptor de encendido se encuentre apagado. Conexión del altavoz Amarillo Amarillo...
Uso del control remoto conectado Montar la unidad en el panel Para habilitar el control remoto Antes de efectuar la instalación, asegúrese de que los pestillos en ambos lados del soporte estén conectado, ajuste [STR CONTROL] del doblados hacia adentro 2 mm. Cuando lo instale en [SET STEERING] en [EXTERNAL] un auto japonés, consulte “Montar la unidad en un (página 18).
Page 71
Si para panel/consola central el fusible se quema nuevamente después de reemplazarlo, puede haber un mal funcionamiento interno. En dicho caso, consulte con su distribuidor Sony más cercano. Soporte Soporte Partes existentes suministradas con su auto NISSAN ...