Connection (For Mex-N4200Bt) - Sony MEX-N5200BT Operating Instructions Manual

Connection (For MEX-N4200BT)


*1 Not supplied
*2 Speaker impedance: 4 Ω – 8 Ω × 4
*3 RCA pin cord (not supplied)
*4 Depending on the type of car, use an adaptor for
a wired remote control (not supplied). For details
on using the wired remote control, see "Using
the wired remote control" (page 37).
*5 Whether in use or not, route the microphone
input cord such that it does not interfere with
driving operations. Secure the cord with a clamp,
etc., if it is installed around your feet.
*6 Depending on the type of car, use an adaptor
(not supplied) if the antenna connector does not
fit.
* 2
See "Power connection diagram" (page 36)
for details.
* 3
* 3
Power amplifier*
For details, see "Making
connections" (page 36).
from a wired remote control
(not supplied)* 4
from a car antenna (aerial)*
Subwoofer* 1
1
Microphone
XA-MC10 * 1 * 5
6
35
GB