Table of Contents
Advertisement
Troubleshooting
If you have any problems, read this manual again and
check the countermeasure for each of the symptoms
listed below.
If the problem persists, contact your nearest authorized
service center or dealer.
Snowy picture
Noisy sound
Check the antenna.
/
/
Check the antenna connection on the
projection TV and on the wall.
Dotted lines or stripes
This may be caused by local interference
/
(e.g. cars, neon signs, hair dryers, etc.)
Adjust the antenna for minimum
interference.
Double images or "ghosts"
/
This may be caused by reflections from
nearby mountains or buildings. A highly
directional antenna may improve the
picture.
Good picture
Noisy sound
/
Check the TV SYSTEM setting.
26
-EN
Additional Information
No picture
No sound
Press POWER.
/
/
Press POWER to turn the projection TV off
for 5 to 6 seconds, then turn it on again by
pressing POWER.
/
Check the antenna connection.
/
Check the VCR connections.
Good picture
No sound
/
Press VOL +.
Press MUTING.
/
No color
/
Adjust COLOR in the VIDEO CONTROL
menu's ADJUSTMENT option.
Check the COLOR SYSTEM setting.
/
TV cabinet creaks
/
Even if the picture or the sound is normal,
changes in the room temperature
sometimes make the TV cabinet expand or
contract, making a noise. This does not
indicate a malfunction.
Advertisement
Table of Contents
