Selecting A Stereo Or Bilingual Program; Setting The Speaker Switch - Sony KP-E41 Operating Instructions Manual

Selecting a stereo or
bilingual program
You can enjoy stereo sound or bilingual program of
NICAM and A2 (German) stereo systems. The initial
setting is stereo sound.
Press A/B/ENLARGE repeatedly until you
receive the sound you want.
The sound changes and the corresponding indicator
lights up as follows:
KP-E41
KP-E53/E61
When receiving a NICAM program:
Broadcasting
On-screen
Display
NICAM stereo
NICAM
NICAM bilingual
NICAM
NICAM monaural
NICAM
When receiving an A2 (German) stereo program:
Broadcasting On-screen
display
A2 (German) stereo
STEREO
A2 (German)
—
bilingual
ENLARGE
A/B
A
B
A B
Selected sound
(Indicator lit)
n Stereo n Regular
(A and B)
n A n B n Regular
(A) (B)
n NICAM monaural
(A)
RegularN
Selected sound
(Indicator lit)
n Stereo n Monaural
(A and B)
n A n B
(A) (B)
Receiving area for NICAM and A2 (German)
stereo programs
System Receiving area
NICAM Hong Kong, Singapore, New
Zealand, etc.
A2 (German) stereo Australia, Malaysia, Thailand, etc.
Notes
• If the signal is very weak, the sound becomes monaural.
• If the stereo sound is noisy, select "regular" or "mono."
The sound becomes monaural, however, the noise will be
reduced.
You cannot receive stereo broadcasts in
mainland China.
Setting the speaker
switch
If you connect a Dolby Pro Logic-compatible amplifier
to the CENTER SPEAKER IN terminals, you can use
the projection TV speakers as center speakers.
To use the projection TV speakers as center speakers,
set the CENTER SPEAKER IN switch located at the
rear of the projection TV to CENTER.
To listen to the sound from the projection TV, set to
MAIN. See page 25 for connection.
CENTER SPEAKER IN
MAIN CENTER
Operations
17 -EN