Setting The Remote Command Mode - Sony KP-E41 Operating Instructions Manual

Improving TV signal
If the reception signal is very strong, you can attenuate
it to obtain better picture reception.
1
Display the MANUAL PROGR menu. (Follow
steps 1 to 3 in "Presetting channels
manually" on page 21.)
2
Press ¢ + or › – to move the cursor (z) to
PR, and press ENTER.
3
Press ¢ + or › – to select the program
position corresponding to the channel
whose signal is very strong, and press
ENTER.
4
Press ¢ + or › – to move the cursor (z) to
ATT, and press ENTER.
5
Press ¢ + or › – to select ON, and press
ENTER.
Setting the remote
command mode
You can use the supplied remote commander to
operate the TV and Sony video equipment, such as a
VCR or multi-disc player. To operate Sony video
equipment, first set the remote command mode for the
video equipment you want to use.
2
1
1
Press and hold the POWER button in the
VCR control area.
2
Press the number buttons that correspond
to the remote command mode.
Mode number
Remote command mode
buttons
VTR1 (e.g., Beta format VCR)
0 and then 1
VTR2 (e.g., 8 mm format VCR)
0 and then 2
VTR3 (e.g., VHS format VCR)
0 and then 3
MDP (multi-disc player)
0 and then 4
After setting the remote command mode, you can
use the following buttons to operate the video
equipment.
1 2 3
4 5 6
7 8 9
0
POWER
Operation buttons for
video equipment
Operations 23 -EN