Video Cd; Adjusting The Tv System; Osd - On Screen Display; Playing A Video Cd With Pbc - Philips FWV595 User Manual

CD/VCD/MP3-CD Operation

VIDEO CD

OSD
VCD 123
MP3 123
1
4
7
PROG
TITLE
_
í
à
ALBUM
_
DSC
PBC RETURN
ZOOM RESUME
KEY CONTROL
ECHO
-

Adjusting the TV System

Before viewing the Video CD, ensure that the set
is switched to corresponding PAL or NTSC
system of your TV set (except Multi–system TV).
Press and hold PAL/NTSC for
more than 2 seconds to
switch between PAL or NTSC
TV system.
After TV system is selected,
the set will automatically switch
to the last TV system setting every time the VCD
source is selected.
Note:
– Before adjusting the TV system, make sure that
there is no MP3-CD in disc tray 1 during power up.
20
2
AUX TUNER TAPE 1/2
2 3
5 6
8 9
0
REPEAT
VOLUME
É
Å
TITLE
+
ë
Ç
á
ALBUM
+
VAC
TITLE/
ALBUM
NAME
DIGEST A-B
SLOW VOCAL
Ö
IS
MAX DBB
+
CD 1•2•3
VCD
PAL/
NTSC
OSD – On Screen Display
If you insert VCD, your TV screen will serve as an
additional display for messages (e.g. PLAY, STOP),
and information stored on the VCD.
Press OSD on the remote control repeatedly to
switch on or off the On Screen Display.
When OSD is switched ON; you can see the
following display on the TV screen.
Below is an example of the OSD message.
SINGLE ELAPSED
PLAY
– "XX" is the current track.
– "TT" is the total tracks.
– "MM" is in minutes.
– "SS" is in seconds.
Note:
– You can also view the information from a
MP3-CD or normal CD.

Playing a Video CD with PBC

VCD with PBC (Playback Control) will be
indicated on the display of the set as soon as
they are inserted. PBC is a predefined play
sequence stored on the VCD.
1
Switch on the TV, insert a VCD with PBC and
press PLAYÉ Å to start playback.
2
MENU appears on the TV screen.
If the menu consists of a list of titles, you
can select a sequence directly
Press Digits 0–9 on the remote control to
select your choice.
The VCD starts playing of the selected
sequence automatically.
Note:
TUN
– If a menu consists of more than one page, press
¡ / ™ to go through the pages.
Switching off PBC
In stop mode, press PBC.
"PBC OFF" will be displayed.
Notes:
– Programme mode is not available whenever PBC
mode is switched on.
– The menu structure depends on the information
stored on the VCD. Please refer to the information
supplied with the disc.
XX/TT MM:SS