Searching And Filtering From The --More-- Prompt - Cisco Nexus 9000 Series Configuration Manual

Searching and Filtering from the --More-- Prompt

Parameter
-g
-i
-k field-number[.char-position][ordering]
-n
-r
-t delimiter
-u
Searching and Filtering from the --More-- Prompt
You can search and filter output from --More–- prompts in the show command output.
This table describes the --More–- prompt commands.
Table 15: --More-- Prompt Commands
Commands
[lines]<space>
[lines]z
[lines]<return>
Cisco Nexus 9000 Series NX-OS Fundamentals Configuration Guide, Release 7.x
68
Understanding the Command-Line Interface
Description
Sorts by comparing a general numeric value.
Sorts only using printable characters. The default sort
includes nonprintable characters.
Sorts according to a key value. There is no default key
value.
Sorts according to a numeric string value.
Reverses order of the sort results. The default sort
output is in ascending order.
Sorts using a specified delimiter. The default delimiter
is the space character.
Removes duplicate lines from the sort results. The
sort output displays the duplicate lines.
Description
Displays output lines for either the specified number
of lines or the current screen size.
Displays output lines for either the specified number
of lines or the current screen size. If you use the lines
argument, that value becomes the new default screen
size.
Displays output lines for either the specified number
of lines or the current default number of lines. The
initial default is 1 line. If you use the optional lines
argument, that value becomes the new default number
of lines to display for this command.