W3 Installation - Barnett Engineering ProTalk LINK Operating Manual

W3 INSTALLATION

11. W3 INSTALLATION
STATUS
INPUT
1 2 3 4 5 6
The W3 module provides wireless callout capability through an embedded
HSPA cell phone. In addition to communications functions, this module
also has 8 digital inputs that can be independently programmed to operate
as one of five different types:
 Standard digital
 Watchdog timer
 Interval timer
 Totalizer
 Accumulator
There are also 4 relay outputs that can be used for remote control; these
relays are controlled by incoming DTMF codes.
For more advanced callout requirements, the module can be configured to
send email and text messages containing the alarm information and can
also receive text messages containing control codes. A limited amount of
programming can also be done using a Touch-Tone set locally or by
calling into the module.
This module can also be used to transfer a database to the ProTalk Link if
the internal cell phone is registered with a data plan through the wireless
carrier. See the LINK.EXE pc application's Help section for details on
using this feature.
Connectors
Refer to Figure 33 below for details of the connector pinouts.
ALARM OUTPUT
1 2 3 4 5 6 7 8 1 2 3 4
OUTPUT 1 OUTPUT 2
7 8
Figure 32 W3 Module Front Panel
Figure 33 W3 Module Connections
OUTPUT 3 OUTPUT 4
PAGE 37
SIM
B1285-W3