Unable To Adjust Setpoint To Obtain Trip; Switch Does Not Actuate - Robertshaw 365A Instruction Manual

MODEL 365A & E365A
VIBRASWITCH® MALFUNCTION DETECTOR
5.2.2
Unable to Adjust Set point Setting to Obtain Trip
An improper air gap exists between hold down (lower) magnet and armature.
Return the Vibraswitch
5.2.3

Switch Does Not Actuate

Defective Switch – verify by manually moving the Armature to the latched (tripped) position and
listen for an audible click of the switch. Verify contact change-of-state by performing a
continuity check.
If the switch does not pass either of the tests above, return the Vibraswitch
repair.
®
to the factory for repair.
PAGE 16
INSTRUCTION MANUAL
909GF294
®
to the factory for