Table of Contents
Advertisement
9.3.
3D Adjustment
Preparation
1. Set up HDC-Z10000 as follows.
• 3D Recording Mode
• Zoom T side (×10)
• 3D display is set to MIX display
• Convergence reset
• Display a guideline.
• Com Communication Mode
2. Set up connection as follows.
• Stick 3D inspection chart of attachment in adjustment software on the perpendicular surface of a wall etc..
• Install HDC-Z10000 in the front of 3D inspection chart.
It fixes so that the horizontal line of 3D inspection chart and guideline may be displayed horizontally on LCD screen.
The intersection of the horizontal and vertical line of a chart be contained in the range of central hatching.
Figure of connection
* 3D inspection chart is attached to adjustment software.
Adjustment
• Connect the main unit to PC with USB.
• Refer to an enclosed description for a detailed adjustment procedure to adjustment software.
Part Number of jig
No.
Part Name
1
AC Adaptor
2
USB Cable
3
PC
4
Adjustment Software (Tatsujin)
5
3D inspection chart
6
Tripod
Part Number
Remarks
---
Bundled items
---
Bundled items
---
---
Download from Web.
---
Including adjustment software
---
Commercial item
48
Advertisement
Table of Contents
