10.2. What is The Factory Settings?
The factory settings clean up and/or refresh the following settings.
1. MENU, MODE, ADJUSTMENT VALUE.
2. SD card format.
3. Reset the folder number and file number of still pictures.
(Setting the folder number is 100, and file number is 0.)
4. Clear the mechanism lock information.
5. Clear the service mode information contents.
6. Initialize the VIERA Link Physical Address.
7. Rewriting lock setup of destination information.
The setting position of factory settings:
Name
INPUT1
+48V
INPUT2
+48V
CH1
VOL
CH2
VOL
Eyepiece corrector lever
Mode switch
Intelligent auto/Manual switches
Power switch
Setting position
MIC
OFF
MIC
OFF
INT(L)
CENTER
INT(R)
CENTER
MYOPIA
REC
MANU
OFF
50