Blaupunkt Bluebot User Manual page 13

Product Operation
How to schedule the robot
A. Setting robot clock
a. In standby or charging status, press
the current system time. Then the left two numbers on LED panel will flash. Press
to increase hour or
b. Press to enter minute-setting mode, the right two numbers on LED panel will flash.
Press
c. Press again to save the setting, then press
press to exit, the current setting will be invalid).
B. Setting the scheduling time
a. In standby or charging status, press
the left two numbers on LED panel will flash, press
to decrease it.
b. Press to enter minute-setting mode, the right two numbers on LED panel will flash,
press
c. Press gain to save the setting, then press
if press
C. Cancel the scheduling
Set the scheduling time to 00:00.
Note:
a. Before scheduling, please set the robot time to be the same with real time.
b. The robot will start cleaning at the schedule time of Robot Clock every day.
to decrease it.
to increase it or
to increase it or
to exit, the current setting will be invalid).
to start clock-setting. the LED panel will show
to decrease it.
to exit (Before the setting is saved, if
and hold it for 3 seconds to start scheduling, then
to increase hour or
to decrease it.
to exit (Before the setting is saved,
11