Panasonic KX-A405 Installation Manual page 3

•
When driving the screws into the wall, be careful to avoid touching any metal laths, wire laths or metal
plates in the wall.
•
To prevent malfunction, deformity, overheating, rust, and discoloration, do not install or place
equipment in the following types of locations:
–
Locations where air ventilation is poor.
–
Locations that may be exposed to sulphurous gas, such as near hot springs.
–
Near devices that emit heat, such as heaters.
–
Near devices that emit electromagnetic noise, such as radios or televisions.
–
Near devices that emit high-frequency noise, such as sewing machines or welders.
•
Do not stretch or bend the cable. Also, do not allow anything to rest on the cable.
•
The unit and the cable should never be placed near or over a radiator or other heat source.
•
Do not bundle the cable that is connected to the unit with the AC power cords of machines located
nearby.
•
Make sure the cable is securely fastened to the wall.
•
The AC adaptor is used as the main disconnect device. Ensure that the AC adaptor is located near the
unit and is easily accessible.
•
Disconnect the AC adaptor cord from the unit before cleaning. Clean the unit with a soft, dry cloth. Do
not use liquid, aerosol cleaners, abrasive powders, or chemical agents to clean the unit.
•
When left unused for a long period of time, disconnect the unit from the AC outlet.
•
Medical—consult the manufacturer of any personal medical devices, such as pacemakers, to
determine if they are adequately shielded from external RF (radio frequency) energy. (The unit operates
in the frequency range of 1920 MHz to 1930 MHz, and the output peak power level is less than
0.12 W.) Do not use the unit in health care facilities if any regulations posted in the area instruct you
not to do so. Hospitals or health care facilities may be using equipment that could be sensitive to
external RF (radio frequency) energy.
SECURITY REQUIREMENTS
Preventing Data Disclosure Over the Network
•
To ensure the security of private conversations, only connect the unit to a secure network.
•
To prevent unauthorized access, only connect the unit to a network that is properly managed.
Notice
SAFETY REQUIREMENTS
•
Before connecting the unit, confirm that the unit supports the intended operating environment.
•
If the unit does not operate properly, disconnect the AC adaptor cord, then connect again.
•
The unit may not operate in the event of a power failure.
•
Do not move the unit while it is in use.
•
Satisfactory operation, interoperability, and compatibility cannot be guaranteed with all equipment
connected to the unit, nor with all services provided by telecommunications providers over networks
connected to the unit.
SECURITY REQUIREMENTS
Privacy of communications may not be ensured when using the wireless systems.
Document Version 2010-06
Important Information
Installation Manual 3