Shutdown & Storage - MAKERGEAR M2 User Manual

If using your M2 regularly, then turn off the power supply and
unplug both the power supply and USB cords when finished.
If storing your M2 for a period of 1‐2 weeks, follow the
instructions listed above AND store the filament spool in its
original bag (fully sealed,with the desiccant packet inside).
If storing your M2 for a period of 2 weeks or more, follow the
instructions listed above THEN cover your entire machine in
order to protect it from the buildup of dust and other airborne
particles.
DO NOT unscrew your nozzle directly from your M2!
To change or remove its nozzle, you must first remove the
entire hot end. Visit our website and Youtube channel for step‐
by‐step instructions on how to remove the hot end and change
its nozzle.
Technical Support lives on our website at
http://www.makergear.com/pages/support
Shutdown & Storage
17