Viewing The Connections - Side Connectors; Aerial Connection; Power Connection - Akai ALED2606TBK User Manual

Note: You can use YPbPr to VGA cable (not supplied) to enable YPbPr signal via VGA input.
WARNING: You cannot use VGA and YPbPr at the same tim
5. SPDIF Out outputs audio signals of the currently watched source.
Use an SPDIF cable to trasfer audio signals to a device that has SPDIF input.

Viewing the Connections - Side Connectors

1. The CI Slot is used for inserting a CI card. A CI card allows you to view all the channels
that you subscribe to. For more information, see "Conditional Access" section.
2. Side USB input.
3. Side audio-video connection input is used for connecting video and audio signals of
external devices. To make a video connection, you must use the supplied AV connection
FDEOH IRU HQDEOLQJ FRQQHFWLRQ )LUVW SOXJ WKH VLQJOH MDFN RI WKH FDEOH WR WKH 79¶V 6LGH $9
VRFNHW $IWHUZDUGV LQVHUW \RXU YLGHR FDEOH¶V QRW VXSSOLHG FRQQHFWRU LQWR WKH <(//2:
input (located on the plural side) of the supplied AV connection cable. The colours of the
connected jacks should match.
To enable audio connection, you must use RED and WHITE inputs of the side AV
FRQQHFWLRQ FDEOH $IWHUZDUGV LQVHUW \RXU GHYLFH¶V DXGLR FDEOH¶V FRQQHFWRUV LQWR
the RED and WHITE jack of the supplied side AV connection cable. Colours of the
connected jacks should match.
4. The headphone jack is used for connecting an external headphone to the system.
Connect to the HEADPHONE jack to listen to the TV from headphones.

Aerial Connection

‡ Connect the aerial to the AERIAL INPUT (ANT) socket located at the rear of the TV.

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
‡ After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
mains. Plug the power cable to the mains socket outlet.
English - 50 -