Sony BDP-CX7000ES Service Manual page 23

1-5-10. Changer Mecha Test (Changer Mecha Test)
(Screen 1)
Diag
Changer Mecha Test
Category:
(Screen 2)
Diag
Category: Changer Mecha Test
DISC Sensor : [0]
TABLE Sensor : [0:0:0:0]
LOAD Sensor : <Released>
DOOR Sensor : <Closed>
Initialize first, please.
[0] Initialize
[1] Popper Up/Down
[OPEN/CLOSE] Open/Close
[PREV] Turn Left
[NEXT] Turn Right
[FR] Turn Around Left
[FF] Turn Around Right
[PLAY] Chuck/Unchuck
HELP: [UP] [DOWN] [ENT] [RET]
Mechanism cannot be operated if it does not initialize it when the
message of "Initialize fi rst, please." is displayed.
The message of "Initialize fi rst, please." disappears when initial-
ization is done.
The sensor display is always updated.
DISC Sensor: "0" or "1" is displayed.
TABLE Sensor: "0" or "1" is displayed.
LOAD Sensor: The state is displayed ("Released", "Release ↔
Lock", "Table Locked" or "Chucked").
DOOR Sensor: The state is displayed ("Opened", "Moving",
"Closed", "Opened/Popper Up", "Opened/Popper
Moving" or "Opened/Popper Down").
Mechanism can be operated by pressing the button of the corre-
sponding remote commander.
[0] The initialization of mechanism is executed.
[1] The door opens and pop up when the door
closes. The pop up when the door opens and
not pop up. The pop down when the door
opens and pop up.
[OPEN/CLOSE] The door is opened or closed.
[PREV ] One slot is rotated to the left (when the door
.
closes, it opens) (when the chucking, it chuck
down).
[NEXT ] One slot is rotated to the right (when the door
>
closes, it opens) (when the chucking, it chuck
down).
[ ] One rotation to the left (when the door closes,
m
it opens) (when the chucking, it chuck down).
[ ] One rotation to the right (when the door
M
closes, it opens) (when the chucking, it chuck
down).
[ ] Disc at the position of the drive is downed in
N
the chuck or the chucking.
1-6. Log
Operation:
[1] Moves to the Error Log screen.
[2] Moves to the Command Log screen.
[ ]/[ ] Moves the cursor.
M m
[ ] Moves to the item selected with the cursor.
3
[RETURN] Returns to the top menu of the service mode.
Select Log
[1] Error Log
[2] Command Log
HELP : [DOWN] [ENT] [RET] [(NUM)]
The page is changes if the [
<
screen where the log was displayed.
Press the [RETURN] button to return from the log display.
1-7. Factory Initialize
Data base, remote control mode, password and other setting value
are initialized, Gracenote relation fi le is deleted.
Operation:
Press the [ ] button in this screen when restoring the set to its
3
factory settings.
[ ] Initialize the set to its factory settings.
3
[RETURN] Return to the top menu of the service mode.
Factory Initialize
[ENT] Start Initialize
[RET] Return to Top Menu
HELP : [ENT] [RET]
BDP-CX7000ES
]/[ ] buttons are pressed on the
,
23