3nh NS800 Manual page 14

NS800 SPECTROPHOTOMETER OPERATING MANUAL
Figure 11 Data Management
5.1.1 Check Record
1） Check Standard Record
Select "Check Record" to enter "Standard Record" interface as shown in Figure
12. It‟s the standard data. You can check different standard data by clicking "↑"
and "↓" at the bottom of the screen. "T001" in the figure means standard record
No. "no name" means the default name of the standard.
2）Check Sample Record
Click "Sample" in standard record interface to check the sample data and the
color difference between the standard and the sample as shown in Figure 13. You
can check different sample data by clicking "↑"and "↓" at the bottom of the
screen. "No.001" means the sample record No. "T001" means standard record
No.
3） Switch Standard Record and Sample Record
Click "Sample" in standard record interface to switch to sample record interface.
Click "Standard" in sample record interface to switch to standard record.
13