Sharp AL-10PK Service Manual page 7

AL-1041
6) "Installation from CD-ROM" window will appear. Insert the
installation CD-ROM into the CD-ROM drive. Type R:\ (if
the CD-ROM is designated as drive R) and click the OK
button. Proceed to step 7.
7) The installation program will start. To install the printer
driver to the default folder, click the Next button. To select
a different folder, select Browse and type in the new path
and folder name. Click OK and say YES to create the
folder, select the Next button to continue.
8) On the display, you will see "printer port to be used". Nor-
mally, this is LPT1 and it is selected automatically.
Ensure that Yes is checked to use the printer as the
default printer.
Finally click the Next button.
9) A "Confirm installation" window will be displayed. To con-
tinue installation, click the Yes button.
10) When the installation is complete, you will be asked
whether or not to print a test page. If you wish to do so,
click the Yes button. At this time, ensure that paper is
loaded in the paper tray.
11) If the test print completes successfully, click the Finish
button. "The installation of the SHARP AL-1000 Series
Software is complete." window will be displayed. Click the
OK button.
B. Windows 98:
1) Load paper into the paper tray of the printer.
2) Turn on the printer.
3) Turn on your computer and start Windows.
Before installing the printer driver, be sure to close all
other applications which may be open.
4) When using Windows 98 on a personal computer with
*
plug & play , the "Add New Hardware Wizard" window will
appear. Click the Next button and follow the on-screen
instructions.
If the "Add New Hardware Wizard" window does not ap-
pear, proceed to step 8.
Plug & play: For plug & play information, see page 4-1.
5) Select Search for the best driver for your device and
click the Next button.
6) Insert the installation CD-ROM into the CD-ROM drive.
Select the CD-ROM drive and click the Next button.
7) Windows driver file search will find the device SHARP AL-
1000 Series. Click the Next button. Proceed to step 9.
8) Insert the installation CD-ROM into the CD-ROM drive.
Click the Start button and select Run. When the window
shown below appears, type R:\SETUP (if the CD-ROM is
designated as drive R) and click the OK button. Proceed
to step 9.
9) The installation program will start. To select a different
folder, select Browse and type in the path and folder
name where the printer driver will be installed. Click OK
and say YES to create the folder, select the Next button
to continue. To install the printer driver to the default
folder, click the Next button.
10) On the display, you will see "printer port to be used". Nor-
mally, this is LPT1 and it is selected automatically. Ensure
that Yes is checked to use the printer as the default
printer. Finally click the Next button.
11) A "Confirm installation" window will be displayed. To con-
tinue installation, click the Yes button.
12) When the installation is complete, you will be asked
whether or not to print a test page. If you wish to do so,
click the Yes button. At this time, ensure that paper is
loaded in the paper tray.
13) If the test print completes successfully, click the Finish
button. "The installation of the SHARP AL-1000 Series
Software is complete." window will be displayed. Click the
OK button.
C. Windows 3.1x:
1) Load paper into the paper tray of the printer.
2) Turn on the printer and then start Windows on your com-
puter.
Before installing the printer driver, be sure to close all
other applications which may be open.
4-2