Table of Contents
Advertisement
To set temperature
Press the UP and DOWN key, you can
Increase or decrease the water temperature.
When the set temperature is higher than
50℃,the HIGH TEMP indicator will illuminate.
HIGH TEMP
Timer
User can set up an operating start and stop time by using the
timer function. The least duration of timer is
TIME ON: User can set up a start time by this. The unit will
automatically operate from the set time to 24:00 on the same
day.
To set start time
Press the TIME ON key, the minute digit
of the clock on the display will flash slowly.
TIME
ON
Press the UP and DOWN key, you can
adjust the minute.
Press the TIME ON key again, the minute
digit stop flashing and the hour digit starts.
TIME
ON
Fig.8-10
Fig.8-11
ten minutes.
Press the UP and DOWN key, you can
adjust the hour.
Press the TIME ON key again or wait for
about 10 seconds, flashing stops and
TIME ON set is finished.
Cancel:
In the unlocked state, press the CANCEL
key for 3 seconds and the TIME ON
function will be canceled.
CANCEL
TIME ON and TIME OFF: Users can set up an operating start
and stop time. When the start time is earlier than the stop time,
the unit will run between the set time. When the start time is
later than the stop time, the unit will run between the start time
today and the stop time the next day, when user sets the same
start and stop time, the stop time will be automatically delayed
by ten minutes.
Fig.8-12
Fig.8 -13
Installation & Owner's Manual
15
Advertisement
Table of Contents
