Table of Contents
Advertisement
Philips Semiconductors
Triple video output amplifier
FEATURES
Typical bandwidth of 5.5 MHz for an output signal of
60 V (p-p)
High slew rate of 900 V/ s
No external components required
Very simple application
Single supply voltage of 200 V
Internal reference voltage of 2.5 V
Fixed gain of 50
Black-Current Stabilization (BCS) circuit with voltage
window from 1.8 to 6 V and current window from
100 A to 10 mA
Thermal protection
Internal protection against positive flashover discharges
appearing on the CRT.
ORDERING INFORMATION
TYPE
NUMBER
NAME
TDA6107JF
DBS9MPF
2002 Oct 18
plastic DIL-bent-SIL medium power package with fin; 9 leads
GENERAL DESCRIPTION
The TDA6107JF includes three video output amplifiers
and is intended to drive the three cathodes of a colour CRT
directly. The device is contained in a plastic DIL-bent-SIL
9-pin medium power (DBS9MPF) package, and uses
high-voltage DMOS technology.
To obtain maximum performance, the amplifier should be
used with black-current control.
PACKAGE
DESCRIPTION
2
Product specification
TDA6107JF
VERSION
SOT111-1
Advertisement
Table of Contents
