Download Print this page

Valet Mode Using The Valet Button; Cold Weather Mode; Advanced Features; Remote Door Locks - Autostart AS-1414 User Manual

Automatic transmission multi-channel remote starter system
Hide thumbs Also See for AS-1414:

Advertisement

To ENTER Valet Mode
1.
With the key in the Ignition switch, turn the key to the
positions 5 times within 10 seconds.
2.
The Parking Light will flash 3 times indicating the Module is now in Valet Mode.
The LED will turn
To EXIT Valet Mode
1.
With the key in the Ignition switch, turn the key to the
positions 5 times within 10 seconds.
2.
The Parking Light will flash twice indicating the Module is now out of Valet Mode.
The LED will turn

Valet Mode Using the Valet Button

(Available only of the plug-in Valet switch is installed)
To put the system into Valet Mode:
1.
Turn the key to the
2.
Press (for at least 1 second) and release the Valet Button. The L.E.D. will come
To take the system out of Valet Mode:
1.
Turn the key to the
2.
Press (for at least 1 second) and release the Valet Button. The L.E.D. will go
The Valet button can only be used if the vehicle keys are in the

Cold Weather Mode

When Cold Weather Mode is active, the engine starts every 2 hours and runs for 4 minutes
(or for 20 minutes with Diesel engines); the routine goes on for a period of 24 hours.
To enter Cold Weather Mode:
Press and hold the
To exit Cold Weather Mode, do any one of the following:
Open the hood.
Start the engine using the remote control.
Turn the ignition key to the
Press and hold the
(until the parking Lights flash once)
Set the vehicle to Valet Mode.

Advanced Features

Remote Door Locks

If your system was installed with the Remote Door Locks option, you will have the
convenience of remote keyless entry.
To LOCK your doors and ARM the Starter Kill:
1.
Press and hold the
2.
The parking lights will flash once and the L.E.D. will flash slowly to confirm that the
doors have been locked and that the Starter Kill feature is enabled if it was
installed.
To UNLOCK your doors and DISARM the Starter Kill:
1.
Press and hold the
2.
The parking lights will flash twice and the L.E.D. will go out to confirm that the
doors have been unlocked and that the Starter Kill feature is disarmed if it was
installed.
Note: If installed and configured in Passive Mode at installation, the Starter Kill feature will
rearm automatically 60 seconds after the doors are unlocked. For that reason, you may
have to unlock your doors a second time if some time elapses before you actually start
the engine.
P. 4
solid.
ON
.
OFF
position.
IGNITION ON (RUN)
position.
IGNITION ON (RUN)
button until the parking lights flash 3 times.
START/STOP
position.
IGNITION ON (RUN)
button for 3 seconds
START/STOP
button for approx. 1 sec.
LOCK
button for approx. 1 sec.
UNLOCK
and then
ON (RUN/IGNITION)
and then
ON (RUN/IGNITION)
position.
IGNITION ON (RUN)
User Guide AS-1414/AS-1424
OFF
OFF
.
ON
.
OUT

Advertisement

loading

This manual is also suitable for:

As-1424