Handstrap Replacement - Motorola MC55A0 User Manual

1 - 12 MC55A0/MC55N0 Enterprise Digital Assistant User Guide

Handstrap Replacement

Removal
To remove the handstrap:
Press the red Power button to suspend the MC55. The PowerKey Action window appears.
1.
Tap Safe Battery Swap. The Decode LED lights red and then turns off.
2.
Slide the handstrap clip out of the handstrap slot.
3.
Handstrap Clip Removal
Figure 1-11
Remove the stylus tether from the handstrap.
4.
Remove the battery.
5.
CAUTION
Using a small flat screwdriver, push the head of the screwdriver between the handstrap pin and the bottom
6.
of the housing as shown below.
Pry the handstrap and pin up and out of the handstrap mounting area.
7.
When removing handstrap pin, be carefully not to damage handstrap mounting area.