Safety Principles - MSL MSF-390 Operation & Maintenance Manual

1. Safety Principles

1-1 General Notice
￭ The user must observe safety principles to prevent accident during operation.
￭ The user must pay attention to preventive maintenance table to prevent accident.
￭ Read the operation manual of your compressor and its drive engine carefully.
1-2 Safety Principles
￭ This machine is designed and constructed for only breathing air compressor so, user
has not to use for other purposes.
￭ Allow only qualified personnel to operate the compressor.
￭ Take care that the intake air is pure and free of toxic gases and exhaust fumes.
￭ Machine operation can be stopped by pressing Emergency Stop Switch in dangerous
situations.
￭ Do not place any objects on compressor while in operation.
￭ Make sure no person or object can accidentally touch any moving parts while
running.
￭ All work on compressor must be carried out while compressor is plugged off and
depressurized.
￭ Check regularly for leaks by brushing all fittings and couplings with a soap solution.
￭ Never weld high pressure tubing.
￭ Filling-hoses must be in perfect condition; special attention should be paid to he
connecting fittings
￭ Units installed with electric motor must be disconnected the power-cable prior to
any work.
￭ Make sure no person is within one meter of the drain-hoses before draining the
condensate
￭ Do not touch the exhaust while the engine is running and within ten minutes after
shutting down.
￭ The main power supply must always disconnected after operation.
￭ The power transmission belt guards should not be opened except checking
main power supply.
￭ The operator should wear ear protection if exposed to the noise of the running
compressor for the extended periods of time.
- 6 -
AIR COMPRESSOR MANUAL