MSL MSF-390 Operation & Maintenance Manual page 3


Safety Precautions
Please refer to the Safety Precautions and use accordingly. The precautions specifically
mentioned in this reading material are of great importance concerning safety, so please follow
as noted. The dangers of misuse are divided into three categories.
��DANGER
Ignoring this notice may result in death and/or fatal injury and can face
:
extreme danger.
��WARNING
Ignoring this notice may result in death and/or fatal injury.
:
��CAUTION
:
Ignoring this notice may result in injury and damage to property.
��
CAUTION
￭ Use only tanks that have been inspected, and never pass the pressure limit as
noted on the tank.
￭ Do not use contaminated gases. Do not use in an area with heavy dust.
￭ When not in use, keep in an open area.
￭ Filter should be replaced regularly as noted in the instruction manual.
(Important: Refer to filter replacement instructions prior to replacement)
￭ Do not inject oil or fuels during use.
￭ To prevent overheating, cool down compressor after 30 minute operating.
￭ User should master instructions and safety precautions in this manual prior to
using the equipment.
￭ Installation area needs to be free of chemicals and debris.
￭ Installation surface needs to be free of erosion.
￭ Install in an area with open air flow and minimal exposure to weather conditions.
��
WARNING
￭ Owner of the equipment should always emphasize precaution to the operator.
￭ Accidents should be avoided through careful observation of abnormalities such
as irregular noise from the equipment.
￭ Equipment parts should not be altered or relocated in any form.
￭ Failure to use recommended parts may result in accidents.
￭ Do not remove or alter safety stickers or safety valves.
￭ Always examine equipment for missing and irregular parts.
￭ Notify us in the event of any discovery of defects, after posting a sign alerting
the equipment out of order.
￭ Machinery should always be operated in right lighting. Lighting too bright or too
dark may lead to accidents in operating the equipment.
￭ Always check the status of oil and need for changing of oil.
￭ Always check the power supply current for the equipment.
WARNING
WARNING
- 3 -