Related Manuals for Furrion FIH1ZEA-BG
Summary of Contents for Furrion FIH1ZEA-BG
- Page 1 Induction Cooktop Operating and Installation Instructions This manual is for use with Furrion FIH1ZEA-BG Induction Cooktop...
-
Page 2: Table Of Contents
Welcome Furrion FIH1ZEA-BG Induction Cooktop Thank you for purchasing a Furrion FIH1ZEA-BG Induction Cooktop. Before installation and use, please read all instructions carefully. This will ensure safe use and reduce the risk of injury to persons. Contents IMPORTANT SAFETY INSTRUCTIONS .......... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTION When using electrical appliances, basic safety precautions should always be followed including the following: 1. Read all instructions before operat- other hot liquids. ing the induction cooktop. 12. Do not use this appliance for other 2. Do not touch hot surfaces. Do not than its intended use. -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS 25. Do not attempt to heat hermeti- 19. This appliance is not intended for cally sealed food containers such use by persons (including children) as unopened cans, otherwise the with limited physical, sensory can may explode, as any air in the or mental capabilities, or lack of can will become superheated. -
Page 5: Introduction To Induction Cooking
Introduction to Induction Cooking How does this Induction cooktop work? An induction cooktop consists of a series of burners called Induction Coils, that operate based on magnetic principles. These coils will heat the cookware itself, and not the cooktop surface, by generating magnetic fields that induct a warming reaction in steel and iron-based pots and pans. -
Page 6: Product Specifications
Adjust Power Lock Timer Temp. Heat ON/OFF or Temp. or Time Adjust Power Lock Timer Temp. Heat ON/OFF or Temp. or Time Specification list Model Applied voltage/frequency Rated power Cut-out(W x D) FIH1ZEA-BG 120V ～ /60Hz 1500W “x14 “ 5/16... -
Page 7: Operation
Operation 1. Standby Mode: Upon inserting the power plug into an electric socket, the induction cooktop will make a “beep” sound once, and all the digital lights on the cooktop will blink once, indicating the unit enters into the Standby Mode. 2. - Page 8 Operation • Temp. Setting Mode: This function cooks at temperature settings. When the unit is in the Readiness mode, or in the Heat mode, press the “Temp. ” key to enter the temperature setting mode, Temp LED is lit up, and the digital display will show “260”...
- Page 9 Operation 7. Special explanations: a. When the induction cooktop is turned off, the cooling fan will automatically continue working for one (1) minute to eliminate heat built up. b. If unsuitable cookware is used, or if the cookware is removed from the cooktop prior to completion of the cooking cycle, the heating function will stop, the digital display will show error message U, and every two (2) seconds, the unit will sound an alert.
-
Page 10: Selecting The Proper Cookware
Selecting the Proper Cookware Suitable Cookware You have to select a cookware that is made from iron, cast iron, stainless steel or enamels that has a smooth base and a diameter of no less than 4.7 inches, and no more than 10.2 inches. Induction cooktop requires cookware composed of ferrous materials in order to properly heat. -
Page 11: Cleaning And Maintenance
Cleaning and Maintenance Please remove the electric power plug from its socket and wait for the unit to cool before cleaning or performing maintenance. 1. Black crystal plate and control panel Slight stain: Please wipe off the plate with soft moistened cloth. Tough stain: Please clean with a soft moistened cloth dipped in a bit of toothpaste or neutral liquid cleaner until no residue remains. -
Page 12: Trouble Shooting
Trouble Shooting 1. For power cord replacement if the power cord is damaged; please contact an appropriate, licensed electrical repair shop.. For safety purposes, please never replace the cord by oneself. 2. Error Code Quick Guide: Problem Possible Cause Solutions •... -
Page 13: Trouble Shooting
Trouble Shooting Problem Possible Cause Solutions • If the voltage of the power supplied to the cooktop is too high, it cannot operate properly and will show this error code. This may be caused “E3” appears in the • Supplied voltage to by increased voltage being supplied to the digital display cooktop is too high... -
Page 14: Installation
Installation Minimum distance from cook-top to any object above must be at least 30” Minimum distance from cook-top to any surface below must be at least 3 ” Cut-out Depth: 14 " 5/16 Cut-out Width: 11 " There must be at least 2 ”... -
Page 15: Overall Dimensions
Overall Dimensions Overall Dimensions Installatio 15" OVERALL DEPTH " 7/16 OVERALL WIDTH Special Declaration All of the contents and material in this manual have been subjected to careful review. The manufacturer reserves the right of interpretation of any mistakes " 3/16 and omissions in printing or misunderstanding of the contents. - Page 16 FURRION.COM Furrion reserve the right to alter the information in this document without prior notice. Furrion shall not be liable for technical or editorial errors or omissions contained herein. IM- FIH1ZEA-BG REV.0...