A new Beltone Hearing instrument! Contents Your Marq hearing instrument Congratulations on your choice of a Beltone Hearing Instru- ment. This is an important step towards clearer hearing and On/Off Function better understanding. We have used all our experience with...
Your Marq Hearing Instrument 6. Model 7. Battery size (Please see page 27 for your selected marq model) 8. Serial number 1. Receiver tube 9. MPG receiver tube 2a. Receiver Mini Dome 10. HPG receiver tube 2b. Receiver Standard Dome 2c.
On/Off Function Delayed Activation Your hearing aid is equipped Your hearing care professional may with an on/off switch integrated have activated the Delayed Activation into the battery compartment. function in your hearing instrument. When the battery compartment The Delayed Activation delays the is fully closed, the instrument switch-on time 10 seconds after is turned on.
Inserting and removing the device Removing: Inserting: 1. Grasp the receiver tube where it bends and pull the receiver dome 1. Hang the instrument over the top of out of your ear canal. the ear. 2. Grasp the receiver tube where it bends and push the receiver dome into your ear canal.
Changing the Battery The battery should be inserted in the battery compartment with the flat side, which is the side with the sticker on, facing When the battery voltage/power up. The battery should fit in like a puzzle piece. Be sure to rem- decreases to a certain level, the ove the sticker before closing the battery compartment door.
Daily Maintenance The Receiver Tube The Receiver Tube comes in two different types; Keep your hearing instrument clean and dry. Wipe the case with MPG (Medium Power Gain) a soft cloth or tissue after use to remove grease or moisture. You and HPG (High Power Gain).
Cleaning the RIE Mold The Receiver Domes We recommend that you use a damp cloth to clean the RIE mold The Receiver Mini Dome / Receiver Standard Dome / Receiver after every time you use it. It’s important to keep it clean from Power Dome should be changed every third month or sooner if wax so that you will not have wax or bacteria building up on the needed.
Page 9
How to mount the Receiver Standard Dome The Receiver Standard Dome consists of two “leaves” and it is important that the largest “leaf” is the outermost “leaf” (4). (1) + (2) The Receiver Standard Dome is mounted by gently This can easily be done by pushing the “leaves” away from the pushing it over the receiver at receiver tube with your forefinger and middle finger (5).
How to mount the Receiver Power Dome Changing wax guard for MPG Receiver Tube We strongly recommend that you always turn to your hearing care professional when the power domes needs to be changed, since it can only be mounted the correct way with a tool. If mounted incorrectly there is a risk that the dome will come of and stay in your ear canal.
• Different types of radiation, e.g. from NMR or CT scanners, Marq17 Standard may damage the hearing instrument. Therefore, do not wear Marq17 HPG Open the hearing instrument during these or other corresponding scanning procedures. Other types of radiation (burglary...
TROUBLESHOOTING GUIDE SYMPTOM CAUSE POSSIBLE REMEDY Device is dead Not turned on Turn on Dead battery Replace battery Battery improperly inserted Insert battery properly Broken receiver or receiver tube Consult your hearing care professional Consult your hearing professional or if you have been in- Blocked Wax Guard Filter structed change Receiver dome or/and HF3 Wax Guard Filter Reinsert carefully...
Key Word Index International warranty and service Any digital hearing instrument from Beltone has an internatio- Battery change nal warranty. Read more on this subject on the warranty card Battery compartment 4,6,7,10 you received with your instrument. Cerumen/debris/earwax 8,12,14,15,18-20 Cleaning the instrument...