Connecting The Equipment - Cisco RV110W Quick Start Manual

• If you are experiencing extreme problems with the Cisco RV110W and
have tried all other troubleshooting measures, press and hold in the
RESET button for more than 10 seconds. This reboots the unit and
restores the factory defaults. Changes you have made to the Cisco
RV110W settings are lost.
LAN Ports (1-4)—These ports provide a LAN connection to network
devices, such as PCs, print servers, or switches.
WAN (Internet) Port—The WAN port is connected to your Internet device,
such as a cable or DSL modem.
POWER Button—Press this button to turn the firewall on and off.
12VDC Port—The 12VDC port is where you connect the provided 12 volt
DC power adapter.

Connecting the Equipment

3
You must connect one PC with an Ethernet cable for the purpose of
N
OTE
the initial configuration. After you complete the initial configuration,
administrative tasks can be performed using a wireless connection.
Power off all equipment, including the cable or DSL modem, the PC
S 1
TEP
you will use to connect to the Cisco RV110W, and the Cisco
RV110W.
You should already have an Ethernet cable connecting your PC to
S 2
TEP
your current cable or DSL modem. Unplug one end of the cable
from your PC and plug it into the port marked "WAN" on the unit.
4 Cisco RV110W Wireless-N VPN Firewall