Ambient Lighting - Ford EXPLORER 2017 Quick Reference Manual

Hide thumbs Also See for EXPLORER 2017:
Table of Contents

Advertisement

C O M F O R T
TILTING HEAD RESTRAINTS*
POWER ADJUSTABLE PEDALS*
Use the
side of the steering column. Press
move the pedals further away from you
or
to move the pedals closer to you.
Adjust the pedals only when the vehicle
is in park (P).
POWER TILT AND TELESCOPE
STEERING COLUMN*
Use the four-way rocker control to tilt
The front head restraints tilt for extra
and telescope the steering wheel to
comfort. To tilt the head restraint, do
your desired position.
the following:
MEMORY FUNCTION*
1. Adjust the seatback to an upright
Allows one-touch recall of memory
driving or riding position.
positions for the driver seat, power
2. Pivot the head restraint toward
mirrors, steering column* and power-
you for the desired position.
adjustable pedals* . Use the memory
A er the head restraint reaches the
controls on the driver door to program
forward-most tilt position, pivoting
and then recall memory positions. To
it forward again releases it to the
program position 1, press and hold the
rearward, un-tilted position.
1 button until you hear a tone.
Use this same procedure to set
SECOND-ROW HEATED SEATS*
positions 2 and 3 using the respective
To operate, press
on the rear of
buttons. Once programmed, you can
the fl oor console repeatedly to cycle
use these controls to recall the set
through the various heat settings
memory positions.
and o . More lights indicate warmer
You can also program your memory
settings. See the Seats chapter in your
seats to your transmitter. That way,
Owner's Manual for details.
when you unlock your door with the
transmitter, your memory features
automatically move into your
14
saved position. See the Seats chapter
in your Owner's Manual for details.
control on the le
to
USB PORT*
Plug in, charge and listen to your
playlists, or just use the smart-charge
feature to power up your USB devices.

AMBIENT LIGHTING*

When activated, this feature lights
select areas of your vehicle with a
choice of colors.
To use:
1. Press the Settings icon, then select
Ambient Lighting.
2. Touch the desired color.
3. Use the scroll bar to increase or
decrease the intensity. Drag the scroll
bar for the active color all the way
down to zero intensity to switch o
ambient lighting.
FLAT-FOLDING THIRD-ROW SEAT*
NOTE:
Make sure that the area under
the seat is free of objects before
stowing it.
To fold and stow the third-row seat:
1. Remove all objects from the seat and
fl oor stowage tub area.
2. Fold the head restraint by pulling the
head restraint release strap.
3. From the rear of the vehicle, fold the
seatback by pulling and holding the
red strap while pushing the seatback
forward. Release the strap when the
seatback starts rotating forward.
4. To fold the seat fully into the fl oor,
release the cushion latches by pulling
two straps at the same time: the
short black strap (next to the red
strap) and the headrest release strap.
*if equipped
*if equipped
NOTE:
Make sure that the area is free of
objects before unstowing it.
1. Unlatch and li the seat out of the
tub in the fl oor by squeezing and
pulling up on the handle. When the
To unfold the third-row seat:
seat is in a vertical position, push the
seat over, letting it fall onto
the latches.
2. To return the seatback to the upright
position, pull the red strap. Then
while holding the red strap, pull the
long strap located on the back of the
seat to raise the seatback.
3. Pull the head restraints up to their
normal position.
NOTE:
Push and pull on the seat to
make sure it latches to the vehicle
fl oor. An unlatched seat may become
dangerous in the event of a sudden
stop or crash.
POWERFOLD
These seats feature a power, one-touch
operation that allows you to fold and
stow the seats. See the Seats chapter
in your Owner's Manual for details.
THIRD-ROW SEATS*
®
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents