Table of Contents
Advertisement
HANDSET SETUP
Overview
To go to set up mode, press and hold FLASH/PROG key for 2 seconds. The following
modes will set by be pressing FLASH/PROG key. Set Language
Contrast
Time Setting
Auto Talk on/off.
Press the (FLASH/PROG) key to advance to the next setting.
Press and hold the (FLASH/PROG) key to exit the menu.
To Set Language
Press the(
)or(
) key to change to English, French or
Spanish.
The language will change to allow user to choose the
language.
(FLASH/PROG) will end the program sequence.
To Set Area Code
The LCD will display " AREA CODE?..." and one of "..."
will indicate ready to enter a digit.
Cursor will move to left when a digit is entered.
User can modify the digit or press(FLASH/PROG) to end
this setting. and the digit will be saved.
If you do not have 10-digit dialling in your area do not use
this feature.
(FLASH/PROG) will end the program sequence.
To Set Contrast
Press the(
)or(
) key to change the Contrast. The
contrast will change to allow user to choose the contrast
level.
(FLASH/PROG) will end the program sequence.
Tone/Pulse
Ring OFF/LO/HI
15
Area Code
Ring Type A,B
S E T L A N G U A G E
S E T L A N G U A G E
1 2 3
A R E A C O D E ?
A R E A C O D E ?
C O N T R A S T
Advertisement
Table of Contents
