Desk/Table Installation - Southwestern Bell GH5810US Owner's Manual

INSTALLATION
Desk or Table Installation
1. The GH5810 base unit has built-in wall mount hanger holes. There is no bracket
to assemble. Simply take the base unit out of the box.
2. Plug the AC adaptor cord into the 9V DC-300mA input jack on the Base unit.
3. Plug one end of the telephone cord into the TEL LINE jack on the Base unit.
4. Plug the other end of the telephone cord into the telephone wall jack.
5. Plug the AC adaptor into a standard 120V AC wall outlet.
NOTE:
Use only with the AC adaptor supplied with GH5810.
USE ONLY WITH
CLASS2
POWER SOURCE
9V DC 300 m A
TEL LINE
Place the telephone and power cords where they will not create a trip
!
hazard,or where they could become chafed and create a fire or other
electrical hazards.
12