Delsys TRIGNO User Manual page 14

plications. Usage of the interface promotes a high quality connection
between the sensor bars and the skin, minimizing motion artifacts
and the potential disturbances from line interference. Other methods
of skin attachment are not recommended.
Adhesive Sensor Interfaces are for single use only.
Immediately discontinue use if skin irritation or discomfort oc-
curs. All Adhesive Sensor Interfaces are for single use only. Dis-
card after using. Reseal storage bag to maintain freshness.
Prior to affixing the EMG sensor on the surface of the skin, it is rec-
ommended to clean the area to remove dry dermis and skin oils. If
excessive hair is present, it may also be necessary to shave the site. In
cases where the skin is excessively dry, it may be useful to dislodge
dry skin cells by dabbing the site with medical tape. The dry cells will
attach the tape's adhesive when it is removed. Be sure to wipe with
isopropyl alcohol to remove any adhesive residue that may remain.
14
Trigno™ Snap Lead Sensor User's Guide