uning of the Channels
Up to 256 broadcast stations in your reception
area can be stored in the electronic memory.
There are three ways of tuning as follows;
1. Automatic uning (the basic way):
All receivable channels are automatically tuned
in and memorized in consecutive programme
position.
2. Semi-Auto uning:
Use to preset a receivable channel in any
desired programme position, e.g. the position
with the same number as the channel.
3. Manual uning:
Manually tune a channel if it cannot be
automatically tuned, such as when the signal is
poor.
Automatic
uning
1
Press the MENU button for MAIN menu
display.
2
Select
" PRESET "
by
pressing
the
Programme UP or DOWN button.
3
Press the VOLUME + or - button for
PRESET menu display. On entering PRESET
display, Automatic Tuning will be selected
initially.
ODE
AUIO
Semi-Auto uning and Manual uning
1
Press the MENU button for MAIN menu
display.
2
Select
" PRESET "
by
pressing
the
Programme UP or DOWN button.
3
Press the VOLUME + or - button for
PRESET
menu
display.
On
entering
PRESET display, Automatic Tuning will
be selected initially.
4
Select " SEMI " or " MANUAL " by pressing the
VOLUME + or - button.
5
Select
" SEARCH "
by
pressing
the
Programme UP or DOWN button.
SEARCH
START
Semi-Auto uning:
Press and release the VOLUME + or - button
to search for required TV station. Once a
station is located, tuning will automatically
stop. Continue till desired channel is located.
SEARCH
.... .
Manual uning :
Press and hold the VOLUME + or - button to
search for required TV station.
4
Select
" SEARCH "
by
pressing
the
Programme UP or DOWN button.
SEARCH
START
5
Press the VOLUME (+) button to start
channel tuning.
CHA
After all receivable channels have been found and
stored, the TV set automatically returns to pro
gramme position " 1 " .
■ The Automatic Tuning operation can be
cancelled
at
any time
by pressing the
Programme UP or DOWN button.
The VOLUME + button will move tuning toward
the higher frequencies, and the VOLUME -
button will
move tuning toward the lower
frequencies.
6
Once desired channel is located, select
" MEMORY " by pressing the Programme UP
or DOWN button.
7
Press the VOLUME + or - button to enter the
desired channel into Programme Position 6.
To pre-set other Programme Positions, repeat
steps 5-8.
8
Press the MENU button to return to normal
TV display.
0