Advertisement

Quick Links

Phone layout

The phone has 21 keypad keys,and a charger/headset port.
1. Earpiece
3. Left key
5.Call/Dial Key
7.Navigation Keys
9.MIC
11.Back Cover
Icons on the main screen
Unread message

Basic operation

1、Switch On/Off the Phone
To turn on/off the phone, press and hold the End/Power key.
If you have enabled the SIM Lock function then enter the PIN code (the 4 to 8 digits secret code of your
SIM card). It is preconfigured and provided to you by your network operator or retailer. If you enter an
Ring
Battery
2. Display
4.Right key
6.End/Power Key
8.Center Key
10.Camera
Vibrate
Ring and vibrate
Ring after vibrate

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the L1N and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Azumi L1N

  • Page 1 Phone layout The phone has 21 keypad keys,and a charger/headset port. 1. Earpiece 2. Display 3. Left key 4.Right key 5.Call/Dial Key 6.End/Power Key 7.Navigation Keys 8.Center Key 9.MIC 10.Camera 11.Back Cover Icons on the main screen Alarm Unread message Ring Battery Vibrate...
  • Page 2: Frequently Asked Questions

    incorrect PIN code 3 times in succession, your SIM card will be locked. To unlock it, you must obtain a code from your network operator. 2、To Make Calls If the icon appears on the screen, then you can make or receive calls. Input the phone number (should affix the international/national/regional code or district code if ...
  • Page 3 6.How to insert sim card An SIM card carries useful information, including your mobile phone number, PIN (Personal Identification Number), PIN2, PUK (PIN Unlocking Key), PUK2 (PIN2 Unlocking Key), IMSI (International Mobile Subscriber Identity), network information, contacts data, and short messages data. Note: After powering off your mobile phone, wait for a few seconds before removing or inserting an SIM card.
  • Page 4 Close the latch. Note: 1. The mobile phone cannot automatically identify the memory card being inserted when the mobile phone is powered on. You must power off the mobile phone and then power it on, so that the phone can identify the Memory card. 2.
  • Page 5  Turn off an alarm Go to Tools>Alarm. Select the alarm you want to turn off, press Edit. Press the navigation key to select Off then press right soft key to save.  Stop an alarm When the alarm rings, •...
  • Page 6 FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2.
  • Page 7 Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 15mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components.

Table of Contents