Ais Operation; Controls For Use With Ais; Turning The Ais Display On Or Off - Furuno FR-8062 Operator's Manual

4.

AIS OPERATION

Connected to an AIS Transponder via an AIS Interface, the FR-8xx2 series can show the name,
position and other nav data of the nearest 100 AIS transponder-equipped ships.
This radar accepts position data fixed by WGS-84 geodetic datum. Set the datum to WGS-84 on
the GPS navigator connected to this radar. If other type of datum is input, the error message
"DATUM" appears and the AIS feature is inoperative.
4.1

Controls for Use with AIS

ENTER: Displays data for cursor-selected active AIS target (in the data box at the bottom of the
screen).
CANCEL/HL OFF: Removes data of cursor-selected AIS target from the data box.
MENU: Accesses the Target and AIS menus for AIS operations.
Trackball: Chooses active target to display its data.
4.2

Turning the AIS Display On or Off

You may turn the AIS display on or off. The system continues processing of AIS targets regardless
of whether the AIS display is on or off, provided it has been activated.
1. Press the MENU key to display the main menu.
2. Choose AIS and then press the ENTER key.
Menu Menu
Brill/Color
Display
Echo
Target Trails
Mark
Custom 1
Custom 2
Custom 3
Manual Tune
Target
ARP
AIS
GPS
System
AIS menu
3. Choose DIsplay and then press the ENTER key.
4. Choose Off or On as appropriate and then press the ENTER key.
5. Press the MENU key to close the menu.
AIS AIS
Display : Off
Symbol Color : Green
Range : 3.0nm
Sector Start : 340
Sector End : 20
Sort By : Range
Number of Target : 100
/ / / : Select
[ENTER]: Enter [CANCEL/HL OFF]: Back
[MENU]: Exit
4-1