Diagnostics
3.
Individual display tests
When you have selected this test, the first screen you will see will be the one below.
To exit this test, select the ENTER,
Below is a table consisting of all the individual components that can be tested in this
program. To scroll through each test, use the down ( ) or up ( ) key, and then select TEST to run
the component test.
STEP
To test:
1
SET
Display all dots and segments
2
SET
© 2008 Viking Preferred Service
SETTINGS: TESTS: Individual display test
Display all dots and segments
CLEAR
TEST
Clear screen
or
Down arrow
( ) key.
RESULT
All digits in the display will light up
All digits in the display will extinguish
To exit:
ENTER. CLEAR or
ENTER. CLEAR or
23