Rear Panel Ports - Cisco ASA 5512-X Hardware Installation Manual

About the ASA 5500-X

Rear Panel Ports

Figure 4 shows the ports for the ASA 5512-X and ASA 5515-X models.
Figure 4 Rear Panel Ports for the ASA 5512-X and ASA 5515-X
.
LED
1 Management 0/0
interface
2 Power supply
3 GigabitEthernet data
interfaces (0/0 through
0/5)
4 USB Ports
5 Console port
Figure 5 shows the ports for the ASA 5525-X.
Figure 5 Rear Panel Ports for the ASA 5525-X
LED
1 Management 0/0
interface
2 Power supply
Cisco ASA 5512-X, ASA 5515-X, ASA 5525-X, ASA 5545-X, and ASA 5555-X Hardware Installation Guide
1
5 4 3
Description
The GigabitEthernet interface that is restricted to management use only.
Connect with an RJ-45 cable.
The chassis power supply.
The 6 on-board data interfaces. Connect with an RJ-45 cable.
The top row port numbers are (from left to right) 5, 3, 1.
The bottom row port numbers are (from left to right) 4, 2, 0.
The two USB standard ports.
(See the Internal and External USB Flash Drives, page
The RS-232 serial console port used to directly connect a computer to the
ASA. Connect with an RJ-45 cable.
1
3
5 4
Description
The GigabitEthernet interface that is restricted to management use only.
Connect with an RJ-45 cable.
The chassis power supply.
ASA Chassis Panels
2
10.)
2
17