Cisco ASA 5512-X Hardware Installation Manual page 39

Installing and Connecting the ASA 5500-X
Figure 7 Install Two Shoulder Screws on Either Side of the Chassis
Rack Mount the Chassis with the Slide Rail Mounting System
This section describes how to mount the chassis using the slide rail mounting system.
Although slide rail mounting is preferred, in the case of two-rail racks where the slide rails will not fit, you can use
the rack mounting brackets. You must order them separately (ASA-BRACKETS=). Note that there will be a slight
bend in the brackets when you attach them. For the procedure for attaching the brackets to the front or back of
the chassis, see Rack Mount the ASA 5512-X, 5515-X, and 5525-X With Brackets, page
Before You Begin

Verify the box contents
Cisco ASA 5512-X, ASA 5515-X, ASA 5525-X, ASA 5545-X, and ASA 5555-X Hardware Installation Guide
Rack Mount the Chassis
35.
39