Samsung 460UT Installation Manual page 11

To adjust the height difference between the monitors on the upper layer,
Move a monitor until a space large enough to accommodate your hand is created.
Rotate the monitor, unfold the holder attached to the bracket and fix the monitor in the holder.
Turn the fine-tuning screw to correct the height difference.
Repeat steps
]Warning
1.Be careful not to catch your fingers.
2.Ensure the holder is fastened to the monitor-mount bracket
BN68-01537F.indb 9
~ till you obtain the optimum result.
.
English - 9
Fixing the monitor
in the holder
2009-12-18 12:17:58