Samsung 460UT Installation Manual page 10

1. Correcting height difference between the front and back of a monitor.
If you turn the fine-tuning screw clockwise or counterclockwise, the monitor will move forward or backward
respectively.
The fine-tuning screw's maximum movement range is 10mm.
Moving the monitor forward
2. Correcting height difference between upper and lower monitors.
If you turn the fine-tuning screw on the bottom of the monitor clockwise or counterclockwise, the monitor will
move up or down respectively.
Raising the monitor
BN68-01537F.indb 8
Moving the monitor backward
Lowering the monitor
English - 8
2009-12-18 12:17:57