Table of Contents
Advertisement
A
Product View
Do not plug in your cleaner until you have
completely assembled it per the following
instructions and are familiar with all
instructions and operating procedures.
1 Handle
2 Handle Assembly
3 Upper Body Assembly
4 Carry Handle
5 Lower Body Assembly
6 Ready Tools™ Dial
7 Belt Access Door
8 Removable Nozzle
9 DirtLifter™ PowerBrush
10 Edge Sweep™ Brushes
A-2 Cleaning Formulas
Always use genuine BISSELL deep cleaning
formulas. Non-BISSELL cleaning formulas may
harm the cleaner and may void the guarantee.
10 1.5 L 2X Wash & Protect PRO Professional Stain & Odour Formula
w/ Scotchgard™ Protector
11 1.5 L 2X Wash & Protect PET Pet Stain & Odour Formula
w/ Scotchgard™Protector
12 1.5 L 2X Wash & Protect Stain & Odour Formula
w/ Scotchgard™ Protector
13 1.5 L 2X* Wash & Refresh Blossom & Breeze
w/ Febreze™ Freshness
*2X concentrated formula, 60 mL is equivalent to 120 mL of non-
concentrated formula
To reduce the risk of fire and electric shock
due to internal component damage, use only
BISSELL cleaning fluids intended for use with
the deep cleaner.
To reduce the risk of fire, use only BISSELL deep
cleaning formula for full size machines in your
deep cleaner. Use of cleaning formulas that
contain lemon or pine oil may damage this appliance and
void the guarantee. Chemical spot cleaners or solvent-based
soil removers should not be used. These products may react
with the plastic materials used in your deep cleaner causing
cracking or pitting.
Scotchgard™ is a trademark of 3M®.
Febreze and related trademarks are owned by The Procter & Gamble Company, Cincinnati, Ohio, and used under
license by BISSELL Homecare, Inc.
6
www.BISSELL.com
B
Assembly
Your deep cleaner comes in five easy to
assemble components:
Handle assembly
Upper body assembly
Upper hose rack
Lower body assembly
Lower hose rack
Three Phillips head screws are included and
can be found taped to the handle assembly.
The only tool you will need to assemble your
cleaner is a Phillips head screwdriver.
1. Slide upper body assembly onto lower
body and secure with two screws.
2. With the "tabs" on upper hose rack
pointing toward top of handle, attach upper
hose rack to handle assembly by sliding it to
top of handle until it can go no further. Turn
hose rack until it snaps into place.
3. Slide handle assembly down into upper
body until it will go no further and secure
with screw.
4. Attach lower hose rack to back of upper
body by pushing into open slots and sliding
down until it snaps into place.
5. Wrap flex hose around hose rack and
secure it into notched out holder as shown.
6. Keep flex hose locked in place with hose
secure latch.
Do not plug in your deep cleaner until you have
completely assembled it per the instructions and
are familiar with all instructions and operating
procedures.
Advertisement
Table of Contents
