Disconnecting And Final Steps - Apewell SCS-8 Operation Manual

8. Disconnect the quick release couplers by pulling back on the collar and separating the
male and female adapters.
9. Unscrew the male part from the SEA fill
port.
10. Reinstall the dust cap onto the fill port
of the SEA.
11. Repeat steps 3 thru 8 as needed until all
SEA's are filled to 3000 PSI.
12. Once the SEA's are full, relieve the pressure from the regulator by turning the large
black knob counterclockwise.
13. Turn off the high pressure air source to the fill manifold.
Capewell Aerial Systems LLC
SCS-8 - Operations Manual
Page 6