Intel® Hd Audio Digital Header (Hda1); Ps/2 Keyboard, Mouse Connector (Kb1, Ms1); Ethernet Rj-45 Connectors (Lan1, Lan2) - AXIOMTEK SHB101 User Manual

2.4.10 Intel® HD Audio Digital Header (HDA1)
Pin Signal
1 BCLK
3 RST#
5 SYNC
7 SDOUT
9 SDI0
11 No connector
13 No connector
15 No connector
2.4.11

PS/2 Keyboard, Mouse Connector (KB1, MS1)

The board provides the Keyboard (KB1)/ Mouse (MS1) interface with a 5-pin connector.
Pin Signal
1 Clock
2 DATA
3 No connector
4 GND
5 VCC
2.4.12

Ethernet RJ-45 Connectors (LAN1, LAN2)

The RJ-45 connectors LAN1 and LAN2 are for Ethernet. To connect the board to
100-Base-T or 1000-Base-T hub, just plug one end of the cable into LAN1 and connect
the other end (phone jack) to a 100-Base-T hub or 1000-Base-T hub.
Pin Signal
1 Tx+ (Data transmission positive)
2 Tx- (Data transmission negative)
3 Rx+(Data reception positive)
4 RJ-1(For 1000 base T-Only)
5 RJ-1(For 1000 base T-Only)
6 Rx- (Data reception negative)
7 RJ-1(For 1000 base T-Only)
8 RJ-1(For 1000 base T-Only)
A Active LED
B Speed LED
Board and Pin Assignments
Pin Signal
2 GND
4 VCC3
6 GND
8 VCC3
10 +12V
14 3VDUAL
16 GND
SHB101 LGA775 SBC User's Manual
A
8 7 6 5 4 3 2 1
B
13