Advertisement
HOW TO DO 360º STUNT ROLLS
1. In order to make your BATWING™ do 360º rolls you must fully charge your
battery.
Note: The BATWING™ will not do 360º stunt rolls in Mode1 and under low
battery indication (The LED lights on the drone will be flashing).
2. Once you are ready to attempt a 360º roll, simply depress and let go of
the "STUNT" button on the top right hand side of your controller (see Remote
Diagram on page 3), you will hear a sound INDICATING you are in "STUNT MODE"
3. Now quickly move your right control stick in any of 4 directions; up, down,
left or right and your BATWING™ copter will instantly roll in the associated
direction. See diagram below.
L
9
BATWING™ WARNING:
The
BATWING™ is designed for INDOOR and OUTDOOR use. The BATWING™ blades revolve at
high speeds and can cause damage to the user, spectators and animals. Stand away from the
BATWING™ to reduce the risk of getting into the flight path. Warn spectators that you will
be flying your BATWING™ so that they are aware of its position. Before flight, inspect the
rotor blades to make certain that the blades are securely fastened to the BATWING™.
WARNING!
• Choking/Cutting Hazard. Small Parts/Sharp Rotor Blades.
• Keep hands, hair and loose clothing away from the propeller when the power switch is
turned to the ON position.
• Turn off the transmitter and THE BATWING™ power switches when not in use.
• The included charger is built specifically for the BATWING™ Li-Poly battery. Do not use it
to charge any other battery.
• New alkaline batteries are recommended for maximum performance.
• Parental supervision recommended when flying BATWING™.
BATTERY WARNINGS
R
ECHARGEABLE BATTERY:
This BATWING™ uses a Li-Poly rechargeable battery. If THE battery no longer stays charged,
dispose of tHE battery properly according to local disposal requirements.
CONTROLLER BATTERIES:
Remote control requires 2 "AAA" batteries (not included). Please read the important
battery safety warning below.
• Do not mix alkaline, standard (carbon-zinc) and rechargeable batteries (Nickel Metal
Hydride).
• Do not mix old and new batteries.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the item before being charged (if
removable).
• Rechargeable batteries are only to be charged under adult supervision.
• Exhausted batteries should be removed immediately and must be recycled or disposed of
M
properly, according to state or local government ordinances and regulations.
• The supply terminals are not to be short-circuited.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity (see inside booklet for diagram).
• Do not dispose OF batteries in a fire - batteries may leak or explode.
CARE AND MAINTENANCE
• Always remove the batteries from the wireless infrared remote control when it is not
being used for an extended period of time.
• To clean, gently wipe the remote control and BATWING™ with a clean damp cloth.
• Keep the toy away from direct heat or sunlight.
• Do not submerge the toy into water. This can damage the unit beyond repair.
• Parental guidance recommended when installing or replacing the batteries.
REPLACING THE PROPELLER BLADES
WARNING: Remove battery before replacing blades
Your BATWING™ propeller system is a precision
instrument that may need repair or replacement from
time to time for optimal flight function. Crash landing
from high-speed aerial flights may cause damage to
your BATWING™ propellers.
1.
The BATWING™ has four blades, two A & B blades
on front, and two B & A blades on back (see the
diagram below).
2.
Pick up a blade from the included spare parts and
match the marking to the diagram below.
3.
Replacing the correct blade to the broken blade.
FRONT
FRONT
B
A
A
B
REAR
REAR
10
Hide quick links:
Advertisement
