Setting Monitor Levels - Lexicon ALPHA Owner's Manual

5. To overdub a track, create a new track as previously described then make sure
the record button on the new track is enabled and any previously recorded tracks
are not record enabled. This will allow you to record to the new track without
affecting the previously recorded tracks.
D. SETTING MONITOR LEVELS
To set monitor levels for a comfortable listening level:
1. While playing back the recording, adjust the
levels between the direct input signal and recording playback. To make the direct
input louder than the recording playback in the headphones or speakers, turn
Monitor Mix
the
Monitor Mix
louder, turn the
Input Louder Playback Louder
Playback Softer
Monitor Mix
NOTE:
Changing the
what you hear while recording. You can also adjust the playback level and
pan position of the original track in your monitor by adjusting the controls
for the track within Cubase
2. Adjust the Output Level
Direct
knob towards the
knob towards the
Input Softer
Monitor Mix
does not affect the recording level, only
® LE's Mixer window.
knob to control the overall monitoring level.
Using the Alpha Studio – Recording with the Alpha Studio
Monitor Mix
knob to balance the
side. To make the recorded track(s)
Playback
side.
18