JVC PD-35B50BJ Service Manual page 38

4.4.3 HOW TO EXIT THE SERVICE MENU MODE
Press the [MENU] key to exit the Service Menu mode.
4.4.4 SERVICE CONTROL KEY LAYOUT ON THE REMOTE
CONTROL UNIT
MUTING
1~3
INFOMATION
FUNCTION /
4.4.5 SETTING OF THE SERVICE MENUS
4.4.5.1 [1.ADJUST]
[Do not change setting values of items that are not included in
the "ADJUSTMENT PROCEDURE". They are fixed values]
Set output data of the port of the video, audio, panel control, drive
and main CPU setting.
(1) SIGNAL
The signal displayed on the screen is displayed.
PAL50 : PAL50Hz (Composite / S-video)
PAL60 : PAL60Hz (Composite / S-video)
SECAM : SECAM
NTSC3 : NTSC3.58
NTSC4 : NTSC4.43
525I : 525i (Component)
525P : 525p
625I : 625i (Component)
625P : 625p
750P : 750p
1125I5 : 1125i 50Hz
1125I6 : 1125i 60Hz
PCVGA : PC (VGA)
(2) SCREEN SIZE / MULTI PICTURE
State of the SCREEN SIZE or MULTI PICTURE is displayed.
•
SCREEN SIZE
FULL : FULL
PANO : PANORAMIC
1609 : 16:9 ZOOM
1609S : 16:9 ZOOM SUBTITLE
1409 : 14:9 ZOOM
REGU : REGULAR
•
MULTI PICTURE
M2 : 2 pictures
M12 : 12 pictures
1-34 (No.YA098)
FUNCTION
Fig.2
(3) PICTURE MODE
The PICTURE MODE is displayed.
STD : STANDARD
BRI : BRIGHT
SOFT : SOFT
GAME : GAME
(4) COLOUR TEMP.
The COLOUR TEMP. is displayed.
H : WARM
M : NORMAL
L : COOL
(5) ITEM NO.
The ITEM NO. is displayed.
•
[Function (
For scrolling up / down the setting items.
/
→ → → → → S001...↔ ↔ ↔ ↔ ↔ T001...↔ ↔ ↔ ↔ ↔ P001...↔ ↔ ↔ ↔ ↔ D001...↔ ↔ ↔ ↔ ↔ Z001...← ← ← ← ←
(6) SETTING VALUE
The SETTING VALUE is displayed.
•
[Function (
For scrolling up / down the setting values.
Item No.
S001~S039
T001~T010
P001~P010
D001~D187
Z001~Z010
4.4.5.2 [2.SELF CHECK]
[Refer to "SECTION 5 TROUBLESHOOTING" (page 1-47)]
4.4.5.3 [3.I2C STOP]
[Setting for this item is not required in servicing]
(5) ITEM NO.
(1) SIGNAL
(2) SCREEN SIZE / MULTI PICTURE
/ )] key
/ )] key
Setting items
This item adjusts the setting values of the video
circuit.
This item adjusts the setting values of the
audio circuit.
This item adjusts the setting values of the
panel control circuit.
This item adjusts the setting values of the drive
circuit.
This item adjusts the setting values of the main
CPU circuit.
(6) SETTING VALUE
S001 PREPATE 0
PAL50 FULL STD M
(3) PICTURE MODE
(4) COLOUR TEMP.
Fig.3